rc drift cars nitro
Make Your Own Rc Drift Tires
Back before RC drifting become as commercial as it is today, we used to use a couple of tricks to get ourselves sideways, I explore a little drift history and explain how you can make your own drift tires on a shoestring.
As soon as I realized that 1/10 scale remote control cars were almost identical to real cars, I knew they would drift, the only problem was that without an incredibly powerful motor and a huge tire budget it just wasn't a reality.
At first we tried to change the surface, as there quiet a few places where you can drift really well on rubber tires, underground parking lots for example. It wasn't until a few months later that we started to experiment with changing the tires to drift, the first thing we did to tape the tires, this involves using insulation tape to leave the tire without any traction, there is a specific way which works the best, you only tape the outside edges of your tire, or what I found also works as taking a strip down the center of each tire, but leaving the edges open rubber.
You need to experiment to find out what works best with your particular car and driving style.
It wasn't long after we first started drifting that other types of tires started to pop up, Tamiya released a drift tire which was a very hard rubber, this gave a little too much traction, but with a nitro car they are just perfect. Yokomo had a set of tires that included two hard plastic rings, they were replaceable, but at a pretty steep cost, they later retired these for a solid center replaceable ring, that still wares out too quickly and costs too much to replace.
Currently the tire of choice is a completely hard tire made from polyethylene, which give a very nice amount of grip for drifting, these are last much longer than the tape or hard rubber tires. In me experience the polyethylene tires can last well over a year.
To fit the polyethylene tires the best way to do it is to heat up the tire and cool down the rim, I put the rims in a fridge for a few hours and use a hair dryer to heat up the tires, then they slide over each other and when they cool down / heat up the polyethylene tire will fit snugly on the rims.
One of the most important things to consider when choosing a drift tire is what everyone else is using, it's difficult to compete with people who are using a different type of tire as it will make your car perform differently to the one on the track, if you have too much traction you'll have too much speed, then you will out run the others, which would be a good thing if you were racing. no enough traction and you won't be able to keep up with the big drifts.
Taping your tires is a great place to start, but it doesn't last long, at best only a couple of runs, and it's not something you can use in a competition and expect to place.
About the Author
Gregory Alexander is member of Drift Karnage - RC Drifting team and is currently competing in the D10 Drift Series, a more detailed article, including pictures can be found here -> www.rcspares.com.
Your Easy Guide to Getting Started RC vehicles
As a rookie, did not want to risk buying a RC plane or RC sailing vessels undeveloped their flight feathers and sea legs first. You probably want to start in a more controlled environment, where the risk of damaging your RC vehicle is minimal. For this reason, there is no better place for his inaugural test run to the comfort of your own home.
So what type of radio control car is cheap to buy, cheap, safe and easy to implement, but above all, incredibly fun to drive?
How about a super mini vehicle controlled infrared RC? These are the benefits for you to purchase one of these fun little RC vehicles:
or use insurance.
Being an electric drive product (Not recommended for children under 6 years of age without adult supervision), this RC vehicle is safer than the option of Gas Nitro. You may find that the vehicle RC you buy benefits over current protection.
or simply equipped.
You get the vehicle itself and the Financial RC / charger. All you need to buy are 6, 1.5 V AA alkaline batteries (found in a compartment beneath the controller / charger).
or easily attributable.
Enough plug the charging cable from Controller / charger into the back of your RC vehicle, ensuring that the arrow on the cable connector is visible at the top. Set the switch charger on and set up of your vehicle RC OFF switch. Charging time is only 20-40 minutes. NOTE: allow batteries to cool for about 10 minutes before recharging. The charge indicator is green to the load, and turns off when charging is complete. Change the batteries when the charge is insufficient time extended.
Simple or to operate.
Change your RC vehicles crawl. In the controller, use the left joystick to control forward and reverse your RC vehicle movement and the right (direction) of the joystick to turn your car left and right RC. Once you have mastered 'tracking', change your RC Car to "climb" and read on ...
Fun and to drive.
Not only can you drive this little gem of an RC vehicle in your living room floor, you can make it up your walls! Cool huh? Simply activate your RC Vehicle tracking / OFF / climb the climbing position, place it on a wall and maneuver your RC vehicle as you would on the ground, using left and right. RC If your vehicle does not rise, this means that their most current protection is activated. Turn off the vehicle during about 30 seconds and then restart it.
o * * Reflective forward / reverse operation.
Push the joystick forward and the left lights come on, pull the joystick back and the rear lights of RC car go.
o * * lighting on the left / Performance management correct.
Push the joystick to the left, the left headlight lights. Reverse to the left and the left tail light is lit. Push the joystick to the right and guess what? Yes, another nice touch!
o Easy to implement in your home.
All you need is a clean, flat surface (floor / wall) that is neither too soft nor too harsh
o Easy to maintain.
In order not to impair the ability to maneuver, make sure the fabric air / vacuum skirts below their RC vehicles are kept free of dirt / dust / hair / lint. Clean the tires with a damp cloth.
o Easy to maintain maximum performance of your RC vehicle.
RC Keep your vehicle battery is fully charged, the tissue of the foot outwards obstructions and adjusted to an angle about 45 degrees (this should ensure that your vehicle is sucked against the wall RC). Make sure the RC vehicle passes to crawl or climb, as appropriate.
Remember, your first RC vehicle could be the start of a hobby that will take you 'on the road "so that ultimately RC heaven - no joke. From there, the trip could involve an adventure that grows as your collection grows RC Vehicle. Apart from the larger scale, electric RC vehicles, you can try Nitro Gas RC vehicles. Both types are roaders and RC RC Racers Off Street, covered jeeps and buggies, climbing / crawling hammers and trucks, rally and racing, drifting and cars and trucks.
About the Author
Vijay Patel introduces newbies to the world of RC Vehicles.
Find out how easy it is to buy your RC Vehicles at http://www.rcautomobiles.com, where Vijay welcomes your feedback on how he may serve you better.
